Aqua Broadcast Cobalt FM Transmitter – Quick Start Guide

1. Log In

• Open your web browser.

• Enter the transmitter's IP address and press Enter.

• Use default login credentials:
  Username: admin
  Password: pass

• Click Sign In.

2. Set Frequency and Power

• Go to Radio Frequency menu.

• Click the padlock icon next to Frequency/Power to unlock.

• Make adjustments as needed.

• Click Save.

3. Enable RF

• Ensure you're connected to an antenna or dummy load.

• Go to RF Enable, click On.

• Click Save.

4. Select Audio Input

• Go to Audio Processor menu.

• Under Processor In, select your input type (e.g., Analog, AES, etc.).

• Click Save.

5. Choose Audio Preset

• Under Audio Preset, select a preset to match your station sound.

• To use an external processor, select Bypass.

• Click Save.

6. Check & Adjust Input Levels

• The Input screen shows active audio sources.

• Adjust input levels if needed (factory settings are usually fine).

7. Configure Exciter & RDS

• Go to Exciter and Stereo screen.

• MPX Source:

  • Use Internal for most setups.

  • Choose Digital MPX if needed.

• RDS Source:

  • Internal – use built-in encoder

  • External – external encoder

  • No RDS – disables RDS

• Click Save.

8. Optional: Adjust Stereo & ITU Limiter

• Fine-tune Stereo Encoder if necessary.

• Enable ITU Limiter if required by your country's regulations.

   

  
  View a video of the quick start process at the following url: 
  https://25126502.hs-sites-eu1.com/aqua-broadcast-cobalt-fm-transmitter-quick-start-guide